Publications (341)

Sort by: Date | Alphabet | Updated on
10 | 25 | 50 | 100 
Previous page Previous page1/4 Next page Last page
A C D E F G H I L M N O P R S T U V W All 
A1 Journal article (refereed), original research
Comparison of Commercial and Open-Source FEM Software: A Case Study (2020)
IEEE Transactions on Industry Applications
Zaheer Minhaj, Lindh Pia, Aarniovuori Lassi, Pyrhönen Juha
A4 Conference proceedings
DC microgrid concept for mine environment (2020)
European Conference On Power Electronics And Applications
2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)
Pursiainen Jooa, Rekola Jenni, Juntunen Raimo, Valtee Mikko, Peltoniemi Pasi
A4 Conference proceedings
Determination of li-ion battery degradation mechanisms at high c-rate charging (2020)
2019 IEEE Vehicle Power and Propulsion Conference (VPPC)
Murashko Kirill, Li Dongjiang, Danilov Dmitri L., Notten Peter H. L., Pyrhönen Juha, Jokiniemi Jorma
A1 Journal article (refereed), original research
Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell (2020)
International Journal of Heat and Mass Transfer
Murashko K.A., Pyrhönen J., Jokiniemi J.
A1 Journal article (refereed), original research
Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature Working Conditions (2020)
IEEE Transactions on Industrial Electronics
Gülec Mehmet, Aydin Metin, Nerg Janne, Lindh Pia, Pyrhönen Juha
A1 Journal article (refereed), original research
Mitigating noncirculating bearing currents by a correct stator magnetic circuit and winding design (2020)
IEEE Transactions on Industrial Electronics
Vostrov Konstantin, Pyrhönen Juha, Niemelä Markku, Ahola Jero, Lindh Pia
A1 Journal article (refereed), original research
Mitigation of inverter-induced noncirculating bearing currents by introducing grounded electrodes into stator slot openings (2020)
IEEE Transactions on Industrial Electronics
Vostrov Konstantin, Pyrhönen Juha, Lindh Pia, Niemelä Markku, Ahola Jero
A4 Conference proceedings
Model Predictive Control with Reduced Integration Step Size of a Switched Reluctance Drive (2020)
2020 XI International Conference on Electrical Power Drive Systems (ICEPDS)
Anuchin Alecksey, Podzorova Valentina, Hirz Mario, Datlinger Christoph, Aarniovuori Lassi, Popova Viktoriya, Demidova Galina, Hao Chen
A1 Journal article (refereed), original research
New finite element based method for thermal analysis of axial flux interior rotor permanent magnet synchronous machine (2020)
IET Electric Power Applications
Habibinia Davod, Rostami Naghi, Feyzi Mohammad Reza, Soltanipour Hossein, Pyrhönen Juha
A4 Conference proceedings
PWM-Induced Harmonic Power in 75 kW IM Drive System (2020)
European Conference On Power Electronics And Applications
2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemela Markku, Pyrhönen Juha
A4 Conference proceedings
Retrofit Optimization Of Battery Air Cooling By CFD And Machine Learning (2020)
Communications of the ECMS
34th International ECMS Conference on Modelling and Simulation, ECMS 2020
Immonen Eero, Sovela Janne, Ranta Samuli, Murashko Kirill, Immonen Paula
A2 Review article, literature review, systematic review
Review of the Application of Composite Materials in Electrical Machines (2020)
International Review of Electrical Engineering: Iree
Ismagilov F., Uzhegov N., Vavilov V., Sayakhov I.
A1 Journal article (refereed), original research
Accelerating the Time-Stepping Finite-Element Analysis of Induction Machines in Transient-Magnetic Solutions (2019)
IEEE Access
Di Chong, Petrov Ilya, Pyrhönen Juha, Chen Jiahao
A4 Conference proceedings
Advanced Uncertainty Calculation Method for Converter-Fed Motor Loss Determining (2019)
2019 IEEE International Electric Machines & Drives Conference (IEMDC)
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
A4 Conference proceedings
Analytical Evaluation of High-Efficiency Induction Motor Losses (2019)
2019 IEEE International Electric Machines & Drives Conference (IEMDC)
Aarniovuori Lassi, Lindh Pia, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha, Cao Wenping
A1 Journal article (refereed), original research
Classification of Power Quality Disturbances Using Wigner-Ville Distribution and Deep Convolutional Neural Networks (2019)
IEEE Access
Cai Kewei, Cao Wenping, Aarniovuori Lassi, Pang Hongshuai, Lin Yuanshan, Li Guofeng
A1 Journal article (refereed), original research
Closed-Form Solution for the Slot Leakage Inductance of Tooth-Coil-Winding Permanent Magnet Machines (2019)
IEEE Transactions on Energy Conversion
Madariaga Carlos, Jara Werner, Tapia Juan A., Pyrhönen Juha, Lindh Pia, Riedemann Javier A.
A4 Conference proceedings
Design of a Stainless Core Submersible Permanent Magnet Generator for Tidal Energy (2019)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
45th Annual Conference of the IEEE Industrial Electronics Society IECON 2019
Hoffer Alvaro E., Tapia Juan A., Petrov Ilya, Pyrhönen Juha
A1 Journal article (refereed), original research
Direct Liquid Cooling Method Verified With a Permanent-Magnet Traction Motor in a Bus (2019)
IEEE Transactions on Industry Applications
Lindh Pia, Petrov Ilya, Pyrhönen Juha, Scherman Eero, Niemelä Markku, Immonen Paula
A4 Conference proceedings
Experimental Investigation of the Losses and Efficiency a 75 kW Induction Motor Drive System (2019)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
45th Annual Conference of the IEEE Industrial Electronics Society IECON 2019
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Cai Kewei, Pyrhönen Juha, Cao Wenping
A4 Conference proceedings
Measurement Accuracy Requirements for the Efficiency Classification of Converters and Motors (2019)
European Conference On Power Electronics And Applications
2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
Methodology of Power Distribution System Design for Hybrid Short Sea Shipping (2019)
IEEE Transactions on Industrial Electronics
Lana Andrey, Pinomaa Antti, Peltoniemi Pasi, Lahtinen Jari, Lindh Tuomo, Montonen Jan-Henri, Tikkanen Kyösti, Pyrhönen Olli Pekka
A4 Conference proceedings
Model Predictive Control with Reduced Integration Step Size for Continuous Control of an IPM Motor (2019)
2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)
Anuchin Alecksey, Aliamkin Dmitry, Lashkevich, Maxim, Podzorova Valentina, Aarniovuori Lassi, Kennel Ralph
A1 Journal article (refereed), original research
Nonlinear Multidisciplinary Design Approach for Axial-Flux Eddy Current Brakes (2019)
IEEE Transactions on Energy Conversion
Gulec Mehmet, Aydin Metin, Nerg Janne, Lindh Pia, Pyrhönen Juha
A1 Journal article (refereed), original research
Performance of a Direct-Liquid-Cooled Motor in an Electric Bus Under Different Load Cycles (2019)
IEEE Access
Lindh Pia, Petrov Ilya, Immonen Paula, Pyrhönen Juha, Niemelä Markku, Anttila Joel, Paakkinen Marko, Scherman Eero
A1 Journal article (refereed), original research
Review of Electrical Motor Drives for Electric Vehicle Applications (2019)
Mehran University Research Journal of Engineering and Technology
Cao Wenping, Bukhari Abid Ali Shah, Aarniovuori Lassi
A4 Conference proceedings
Solid-Rotor Material Selection for Squirrel-Cage High-Speed Solid-Rotor Induction Machine (2019)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
45th Annual Conference of the IEEE Industrial Electronics Society IECON 2019
Lindh Pia, Immonen Paula, Di Chong, Degano Michele, Pyrhönen Juha
A4 Conference proceedings
The Instrumentation Influence on the Motor Loss Determination Uncertainty (2019)
45th Annual Conference of the IEEE Industrial Electronics Society IECON 2019
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
A4 Conference proceedings
The Role of End-Winding in Building Up Parasitic Capacitances in Induction Motors (2019)
Proceedings (International Conference on Electrical Machines)
2019 IEEE International Electric Machines & Drives Conference (IEMDC)
Vostrov Konstantin, Pyrhönen Juha, Ahola Jero
A1 Journal article (refereed), original research
Voltage Source Converter Energy Efficiency Classification in Accordance with IEC 61800-9-2 (2019)
IEEE Transactions on Industrial Electronics
Aarniovuori Lassi, Härkkäinen Hannu, Anuchin Alecksey, Pyrhönen Juha, Lindh Pia, Wenping Cao
A4 Conference proceedings
Advanced Uncertainty Calculation Method for Frequency Converter Loss Determination (2018)
European Conference On Power Electronics And Applications
2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe)
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
A Novel Computational Method of Skewing Leakage Reactance for a Doubly Skewed Rotor Induction Motor (2018)
IEEE Transactions on Energy Conversion
Bao Xiaohua, Fang Jinlong, Di Chong, Xu Sheng
A1 Journal article (refereed), original research
Calculation of electromagnetic excitation forces in double skewed motors (2018)
Journal of Electrical Engineering && Technology
Bao Xiaohua, Di Chong, Zhou Yang
A4 Conference proceedings
Design and Comparison of Radial Flux Magnetic Levitation Systems Based on Conventional and Buried Permanent Magnet Types Rotors (2018)
2018 XIII International Conference on Electrical Machines (ICEM)
Gulec Mehmet, Yolacan Ersin, Aydin Metin
A4 Conference proceedings
Design Aspects of Direct-on-Line Synchronous Reluctance Motors (2018)
2018 XIII International Conference on Electrical Machines (ICEM)
Abramenko Valerii, Petrov Ilya, Pyrhönen Juha, Aarniovuori Lassi
A4 Conference proceedings
Direct-On-Line Synchronous Reluctance Motor Efficiency Verification with Calorimetric Measurements (2018)
Journal of international conference on electrical machines and systems
2018 XXIII International Conference on Electrical Machines (ICEM)
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha, Kolehmainen Jere, Känsäkangas Tero, Ikäheimo Jouni
A4 Conference proceedings
Induction Motor Efficiency Verification Using a Balance-Type Calorimeter Equipped with a Mass Flow Meter (2018)
European Conference On Power Electronics And Applications
2018 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe)
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
A4 Conference proceedings
Loss Components and Performance of Modern Induction Motors (2018)
2018 XIII International Conference on Electrical Machines (ICEM)
Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha, Cao Wenping, Agamloh Emmanuel
A1 Journal article (refereed), original research
Modeling and Mitigation of Rotor Eddy-Current Losses in High-Speed Solid-Rotor Induction Machines by a Virtual Permanent Magnet Harmonic Machine (2018)
IEEE Transactions on Magnetics
Di Chong, Petrov Ilya, Pyrhonen Juha J.
A4 Conference proceedings
Modelling a Vector Controlled Induction Motor in Simulink (2018)
2018 X International Conference on Electrical Power Drive Systems (ICEPDS)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha, Alalibo Belema, Cao Wenping
A4 Conference proceedings
Motion Synchronization of Biaxial Linear Tooth Belt Drive System (2018)
2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC)
Parkkinen Jukka, Nevaranta Niko, Niemelä Markku, Lindh Tuomo, Pyrhönen Juha
A1 Journal article (refereed), original research
Moving magnet linear actuator with selfholding functionality (2018)
IET Electrical Systems in Transportation
Immonen Paula, Ruuskanen Vesa, Pyrhönen Juha
A1 Journal article (refereed), original research
Multidisciplinary Design of Ultra-High-Speed Electrical Machines (2018)
IEEE Transactions on Energy Conversion
Ismagilov Flur, Uzhegov Nikita, Vavilov Vyacheslav, Bekuzin Vladimir, Ayguzina Valentina
A4 Conference proceedings
Non-circulating Bearing Currents Mitigation Approach Based on Machine Stator Design Options (2018)
Proceedings (International Conference on Electrical Machines)
2018 XIII International Conference on Electrical Machines (ICEM)
Vostrov Konstantin, Pyrhönen Juha, Ahola Jero, Niemelä Markku
A1 Journal article (refereed), original research
Squirrel Cage Rotor Design and Manufacturing for High-Speed Applications (2018)
IEEE Transactions on Industrial Electronics
Barta Jan, Uzhegov Nikita, Losak Petr, Ondrusek Cestmir, Mach Martin, Pyrhönen Juha
A1 Journal article (refereed), original research
The impact of the rotor slit number on the behavior of high-speed induction motor (2018)
Przeglad elektrotechniczny (Electrical Review)
Klima Jiri, Nerg Janne, Barta Jan, Vitek Ondrej
A1 Journal article (refereed), original research
Unbalanced Magnetic Pull Compensation With Active Magnetic Bearings in a 2 MW High-Speed Induction Machine by FEM (2018)
IEEE Transactions on Magnetics
Di Chong, Petrov Ilya, Pyrhönen Juha J., Bao Xiaohua
A4 Conference proceedings
Analysis of damper winding designs for direct-on-line synchronous reluctance motor (2017)
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Abramenko Valerii, Petrov Ilya, Pyrhönen Juha
A4 Conference proceedings
Cogging Force Compensation of a Discontinuous Permanent Magnet Track Linear Motor Drive (2017)
European Conference On Power Electronics And Applications
2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe)
Nevaranta Niko, Huikuri Marko, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
Comparison of High-Speed Electrical Motors for a Turbo Circulator Application (2017)
IEEE Transactions on Industry Applications
Uzhegov Nikita, Barta Jan, Kurfürst Jiri, Ondrusek Cestmir, Pyrhönen Juha
A1 Journal article (refereed), original research
Converter-Fed Induction Motor Efficiency : Practical Applicability of IEC Methods (2017)
IEEE Industrial Electronics Magazine
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
Design Aspects of High-Speed Electrical Machines with Active Magnetic Bearings for Compressor Applications (2017)
IEEE Transactions on Industrial Electronics
Uzhegov Nikita, Smirnov Alexander, Park Cheol Hoon, Ahn Ji Hun, Heikkinen Janne, Pyrhönen Juha
A1 Journal article (refereed), original research
Effect of armature reaction on the core losses of the permanent magnet synchronous motor (2017)
Electrical Engineering
Ruuskanen Vesa
H1 Granted patent
Electric machine with modular stator coils and cooling tubes (2017)
Pyrhönen Juha, Nerg Janne, Alexandrova Yulia, Polikarpova Maria, Semken Scott, Jussila Hanne, Röyttä Pekka
A4 Conference proceedings
Experimental and FEM verification of cogging forces of a permanent magnet linear motor with a discontinuous magnet track (2017)
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Nevaranta Niko, Huikuri Marko, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
Experimental Identification and Parameter Estimation of the Mechanical Driveline of a Hybrid Bus (2017)
IEEE Transactions on Industrial Electronics
Montonen Jan-Henri, Nevaranta Niko, Lindh Tuomo, Alho Jani, Immonen Paula, Pyrhönen Olli
A1 Journal article (refereed), original research
High-speed Electrical Machine with Active Magnetic Bearing System Optimization (2017)
IEEE Transactions on Industrial Electronics
Smirnov Alexander, Uzhegov Nikita, Sillanpää Teemu, Pyrhönen Juha, Pyrhönen Olli
A4 Conference proceedings
Induction motor drive system losses (2017)
International conference on energy efficiency in motor driven systems
10th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS 2017)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha
A4 Conference proceedings
Induction Motor Stator Current Spectral Content under Sinusoidal and PWM Excitation (2017)
European Conference On Power Electronics And Applications
2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha
A4 Conference proceedings
Induction Motor Torque Estimation Accuracy Using Motor Terminal Variables (2017)
2017 IEEE International Electric Machines and Drives Conference (IEMDC)
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Lindh Pia, Pyrhönen Juha
A4 Conference proceedings
Linear recoil curve demagnetization models for ferrite magnets in rotating machinery (2017)
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Egorov Dmitry, Petrov Ilya, Pyrhönen Juha, Link Joosep, Stern Raivo
A4 Conference proceedings
Modulation and control methods to reduce zero sequence current in open-end winding motors (2017)
2017 IEEE International Electric Machines and Drives Conference (IEMDC)
Korhonen Juhamatti, Honkanen Jari, Kärkkäinen Tommi, Nerg Janne, Silventoinen Pertti
A4 Conference proceedings
Overview of Calorimetric Systems Used in Loss Determination of Electric Motor Drives (2017)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Aarniovuori Lassi, Kärkkäinen Hannu, Kosonen Antti, Pyrhönen Juha, Liu Zheng, Cao Wenping
H1 Granted patent
Rotor axle of a high-speed permanent magnet machine (2017)
Pukki Timo, Sopanen Jussi, Lipponen Aki, Nerg Janne, Pyrhönen Juha
A4 Conference proceedings
Selection of Optimal Slice Count for Multi-Slice Analysis of Skewed Induction Motors (2017)
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Aarniovuori Lassi, Ponomarev Pavel, Keränen Janne
A4 Conference proceedings
Technology Comparison of Induction Motor and Synchronous Reluctance Motor (2017)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
43rd Annual Conference of the IEEE Industrial Electronics Society IECON 2017
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha, Kolehmainen Jere
A4 Conference proceedings
Torsional Excitation Upon Short-Circuit in Induction Motors - In Conventional and High-Speed Trains (2017)
46th Turbomachinery and 33rd Pump Symposia (TPS 2017)
Aho Tuomo, Nerg Janne, Baum Christopher
A1 Journal article (refereed), original research
Analysis of 37 kW Converter-Fed Induction Motor Losses (2016)
IEEE Transactions on Industrial Electronics
Aarniovuori Lassi, Rasilo Paavo, Niemelä Markku, Pyrhönen Juha
A1 Journal article (refereed), original research
Assessment of Materials for High-speed PMSMs Having a Tooth-coil Topology (2016)
Progress in Electromagnetics Research M
Uzhegov Nikita, Efimov-Soini Nikolai, Pyrhönen Juha
A1 Journal article (refereed), original research
Common-Mode and RF EMI in a Low-Voltage DC Distribution Network with a PWM Grid-Tie Rectifying Converter (2016)
IEEE Transactions on Smart Grid
Nuutinen Pasi, Pinomaa Antti, Peltoniemi Pasi, Kaipia Tero, Karppanen Janne, Silventoinen Pertti
A4 Conference proceedings
Comparison of High-Speed Electrical Motors for a Turbo Circulator Application (2016)
Journal of international conference on electrical machines and systems
2016 XXII International Conference on Electrical Machines (ICEM)
Uzhegov Nikita, Barta Jan, Kurfürst Jiri, Ondrusek Cestmir, Pyrhönen Juha
A4 Conference proceedings
Converter-fed induction motor losses in different operating points (2016)
European Conference On Power Electronics And Applications
2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)
Kärkkäinen Hannu, Aarniovuori Lassi, Niemelä Markku, Pyrhönen Juha
G5 Doctoral dissertation (article)
Design and Material Selection of High-Speed Rotating Electrical Machines (2016)
Acta Universitatis Lappeenrantaensis
Uzhegov Nikita
A4 Conference proceedings
Design and Validation of a 24-Pole Coreless Axial Flux Permanent Magnet Motor for A Solar Powered Vehicle (2016)
2016 XXII International Conference on Electrical Machines (ICEM)
Aydin M., Gulec M., Demir Y., Akyuz B., Yolacan E.
A4 Conference proceedings
Design considerations of a shunt calorimeter for high-efficiency electrical machines and drives (2016)
Iet international conference on power electronics, machines and drives
8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
Cao Wenping, Chen Huifeng, Aarniovuori Lassi, Yang Nan, Pickert Volker
A4 Conference proceedings
Design of a 400 kW Gas Turbine Prototype (2016)
ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition
Jaatinen-Värri Ahti, Nerg Janne, Uusitalo Antti, Ghalamchi Behnam, Uzhegov Nikita, Smirnov Alexander, Sikanen Eerik, Grönman Aki, Backman Jari, Malkamäki Matti
A1 Journal article (refereed), original research
Determination of the entropy change profile of a cylindrical lithium-ion battery by heat flux measurements (2016)
Journal of Power Sources
Murashko K.A., Mityakov A.V., Mityakov V.Y., Sapozhnikov S.Z., Jokiniemi J., Pyrhönen J.
A1 Journal article (refereed), original research
Direct Liquid Cooling in Low-Power Electrical Machines – Proof-of-Concept (2016)
IEEE Transactions on Energy Conversion
Lindh Pia, Petrov Ilya, Semken Scott, Niemelä Markku, Pyrhönen Juha, Aarniovuori Lassi, Vaimann Toomas, Kallaste Ants
A1 Journal article (refereed), original research
Economics and Greenhouse Gas Balance of Distributed Electricity Production at Sawmills Using Hermetic Turbogenerator (2016)
Renewable Energy
Leino Maija, Uusitalo Ville, Grönman Aki, Nerg Janne, Horttanainen Mika, Soukka Risto, Pyrhönen Juha
C1 Book
Electrical Machine Drives Control: An Introduction (2016)
Pyrhönen Juha, Hrabovcová Valeria, Semken R Scott
A4 Conference proceedings
Factors affecting hysteresis loss risk in rotor-surface-magnet PMSMs (2016)
Journal of international conference on electrical machines and systems
2016 XXII International Conference on Electrical Machines (ICEM)
Egorov Dmitry, Uzhegov Nikita, Petrov Ilya, Pyrhönen Juha
A1 Journal article (refereed), original research
High-Speed Electrical Machine Topology Selection for the 6 kW, 120 000 rpm Helium Turbo-Circulator (2016)
International Review of Electrical Engineering: Iree
Barta Jan, Uzhegov Nikita, Ondrusek Cestmir, Pyrhönen Juha
A1 Journal article (refereed), original research
Iron Loss Analysis of the Permanent-Magnet Synchronous Machine Based on Finite-Element Analysis Over the Electrical Vehicle Drive Cycle
(2016)
IEEE Transactions on Industrial Electronics
Ruuskanen Vesa, Nerg Janne, Rilla Marko, Pyrhönen Juha
A4 Conference proceedings
Modelling and Analysis of a New Axial Flux Permanent Magnet Biased Eddy Current Brake (2016)
2016 XXII International Conference on Electrical Machines (ICEM)
Gulec M., Aydin M.
A1 Journal article (refereed), original research
Modelling of high-power IGBT module short-circuit operation and current distribution by a behavioural model (2016)
IET Power Electronics
Musikka Tatu, Smirnova Liudmila, Niemelä Markku, Silventoinen Pertti, Pyrhönen Olli
A1 Journal article (refereed), original research
Multidisciplinary Design of a Permanent-Magnet Traction Motor for a Hybrid Bus Taking the Load Cycle into Account (2016)
IEEE Transactions on Industrial Electronics
Lindh Pia, Gerami Tehrani Mohammad, Lindh Tuomo, Montonen Jan-Henri, Pyrhönen Juha, Sopanen Jussi, Niemelä Markku, Alexandrova Yulia, Immonen Paula, Aarniovuori Lassi, Polikarpova Maria
A4 Conference proceedings
Non-parametric frequency response estimation of two-mass-system using Kalman filter (2016)
European Conference On Power Electronics And Applications
2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)
Nevaranta Niko, Goubej Martin, Lindh Tuomo, Niemelä Markku, Pyrhönen Olli
A1 Journal article (refereed), original research
Online Identification of a Mechanical System in Frequency Domain using Sliding DFT (2016)
IEEE Transactions on Industrial Electronics
Nevaranta Niko, Derammelaere Stijn, Parkkinen Jukka, Vervisch Bram, Lindh Tuomo, Stockman Kurt, Niemelä Markku, Pyrhönen Olli, Pyrhönen Juha
A1 Journal article (refereed), original research
Online Identification of a Two-Mass System in Frequency Domain using a Kalman Filter (2016)
Modeling, Identification and Control
Nevaranta Niko, Derammelaere Stijn, Parkkinen Jukka, Vervisch Bram, Lindh Tuomo, Niemelä Markku, Pyrhönen Olli
G5 Doctoral dissertation (article)
Online Time and Frequency Domain Identification of a Resonating Mechanical System in Electric Drives (2016)
Acta Universitatis Lappeenrantaensis
Nevaranta Niko
A4 Conference proceedings
Optimization Strategies of PEM Electrolyser as Part of Solar PV System (2016)
European Conference On Power Electronics And Applications
Power Electronics and Applications (EPE'16 ECCE Europe), 2016 18th European Conference
Kosonen Antti, Koponen Joonas, Huoman Kimmo, Ahola Jero, Ruuskanen Vesa, Ahonen Tero, Graf Thomas
A1 Journal article (refereed), original research
Partial Current Harmonic Compensation in Dual Three-Phase PMSMs Considering the Limited Available Voltage (2016)
IEEE Transactions on Industrial Electronics
Karttunen Jussi, Kallio Samuli, Honkanen Jari, Peltoniemi Pasi, Silventoinen Pertti
A4 Conference proceedings
PWM Power Distribution and Switching Frequency Analysis in Motor Drives (2016)
Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
Annual conference of the IEEE Industrial Electronics Society IECON 2016
Aarniovuori Lassi, Kärkkäinen Hannu, Niemelä Markku, Pyrhönen Juha
G4 Doctoral dissertation (monograph)
Thermal modelling of commercial lithium-ion batteries (2016)
Acta Universitatis Lappeenrantaensis
Murashko, Kirill
A1 Journal article (refereed), original research
Adaptive Feedforward Control of an industrial H-drive positioning with Permanent Magnet Linear Motors (2015)
International Review on Modelling and Simulations
Huikuri Marko, Jansen J.W., Lomonova Elena, Pyrhönen Juha
A1 Journal article (refereed), original research
Additional Loss Caused by Drive Cycle Load Transients in Permanent Magnet Traction Motors (2015)
International Review on Modelling and Simulations
Ruuskanen Vesa, Immonen Paula
A4 Conference proceedings
Analytical Electromagnetic Torque Estimation of an Axial Flux Permanent Magnet Machine under Saturation (2015)
Proceedings 2015 IEEE International Electric Machines and Drives Conference (IEMDC)
Jara Werner, Tapia Juan, Pyrhönen Juha, Lindh Pia
A1 Journal article (refereed), original research
Application of Calorimetric Method for Loss Measurement of a SynRM Drive System (2015)
IEEE Transactions on Industrial Electronics
Aarniovuori Lassi, Kolehmainen Jere, Kosonen Antti, Niemelä Markku, Chen Huifeng, Cao Wenping, Pyrhönen Juha
10 | 25 | 50 | 100 
Previous page Previous page1/4 Next page Last page
Share link