Tutkijatohtori Tuomas Skriko

E-mail: Tuomas.Skriko@lut.fi
Mobile phone: +358407626006
CV:
Uploaded on: 21/08/2020

Current Organisation
Laboratory of Welding Technology (Superior organisation: Laboratory of Mechanical Engineering)

Research Interest
Nowadays, a wide variety of steel grades is available for different industry fields, of which products and applications demand various properties from the material used. However, the properties of welded joints determine the performance of a component, structure or final product usually more than the properties of pure base material. Thus, after appropriate material selection, the structure must be design and fabricate properly. The main challenge is to retain the good properties of the base material throughout the whole production chain all the way to the functional properties of the final product. In order to achieve this, the high quality of working must be carry out in each level of the production chain. In addition to general standards and guidelines for the quality assurance of welding and weld joints, extensive concepts for analyzing and governing the quality of design and fabrication of welded steel structures have also been introduced. These can be utilized, for example, when producing welded structures from high and ultra-high strength steels, of which use has increased during past decades in the engineering industry due to their potential in terms of payload capacity, structural durability, energy efficiency, emission control, life cycle management and recycling. However, applying high strength steels causes often stricter rules for design, narrower parameter windows for fabrication (e.g. welding) and more specific precepts for inspection compared to corresponding mild steel structures. Consequently, the management of the production chain by means of digitalization is emphasized in these types of demanding welded structural applications.

Teaching Experience
2012 → , Lecturer and examiner (continuing education), IIW/EWF Programmes, LUT University, Finland
- IWE / IWT: International Welding Engineer / Technologist degree programme
- IWSD: International Welded Structures Designer degree programme
- IMORWP: International Mechanized, Orbital and Robot Welding Personnel degree programme
- RWC-S: Responsible Welding Coordinator (level Specific) degree programme

2011 → , Lecturer and examiner (basic studies), Bachelor’s and Master's Programmes in Mechanical Engineering, LUT University, Finland
- Welding Technology courses
- Steel Structures courses

Projects as Project Manager
Energy-efficient systems based on renewable energy for Arctic conditions (01/11/2018 - 31/10/2021)
Funder: Other International



Projects as Co-Investigator
AluWeld (15/09/2020 - 15/09/2023)
Funder: Business Finland
ISA-LUT (01/01/2019 - 31/03/2021)
Funder: Business Finland
ProDi (01/01/2018 - 29/02/2020)
Funder: Tekes



Publications
Go to first page Go to previous page 2 of 3 Go to next page Go to last page
Fatigue Performance of GMA-Brazed Non-load Carrying Joints Made of Ultra-High-Strength Steel (2018)
A4 Conference proceedings
Ahola Antti, Skriko Tuomas, Björk Timo
Vehicle and Automotive Engineering 2 - Proceedings of the 2nd VAE2018
3R-menetelmän käyttö vaihtuva-amplitudisesti kuormitettujen hitsausliitosten väsymisanalysoinnissa (2016)
A1 Journal article (refereed), original research
Nykänen Timo, Mettänen Heli, Ahola Antti, et al.
Rakenteiden Mekaniikka
Effect of side grooves on plane stress fracture behavior of compact tension specimens made of ultra-high strength steel (2016)
A4 Conference proceedings
Dabiri Mohammad, Skriko Tuomas, Amraei Mohsen, et al.
Key Engineering Materials
Effect of the welding process and filler material on the fatigue behavior of 960 MPa structural steel at a butt joint configuration (2016)
A1 Journal article (refereed), original research
Siltanen Jukka, Skriko Tuomas, Björk Timo
Journal of Laser Applications
Effects of fabrication processes on the deformation capacity of S960 ultra-high strength steel (2016)
A1 Journal article (refereed), original research
Amraei Mohsen, Dabiri Mohammad, Björk Timo, et al.
Journal of Manufacturing Science and Engineering
Experimental fatigue characterization and finite element analysis of elasto-plastic behavior of notched specimens made of direct-quenched ultra-high strength steel (2016)
A1 Journal article (refereed), original research
Dabiri Mohammad, Isakov Matti, Skriko Tuomas, et al.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Fatigue strength of TIG-dressed ultra-high-strength steel fillet weld joints at high stress ratio (2016)
A1 Journal article (refereed), original research
Skriko Tuomas, Ghafouri Mehran, Björk Timo
International Journal of Fatigue
Plastic strain characteristics of butt-welded ultra-high strength steel (UHSS) (2016)
A1 Journal article (refereed), original research
Amraei Mohsen, Skriko Tuomas, Björk Timo, et al.
Thin-Walled Structures
Suojausterästen materiaalimallit (2016)
A2 Review article, literature review, systematic review
Neuvonen Riku, Björk Timo, Skriko Tuomas
Rakenteiden Mekaniikka
Effect of the Welding Process and Filler Material on the Fatigue Behaviour of 960 MPa Structural Steel at a Butt Joint Configuration (2015)
A4 Conference proceedings
Siltanen Jukka, Skriko Tuomas
2015 ICALEO Conference Proceedings (Electronic Access)



Keywords
Digitalization
Empirical Study
Metals
Quality
Welded structures

Last updated on 2020-21-08 at 05:02